TECARC PLASMA 76i & 126i 400 Volt
Ex. VAT

Plasma Cutting Machines - Three Phase

   
TECARC 76i PLASMA GUILDEA WELDING.jpg

PLASMA 76i & 126i models

 76i £990 +VAT       126i £1650 +VAT

Important notice; Many small inverter plasma machines on the market today do not comply with BS EN standards, these can be unsafe to use & possibly lethal. We strongly suggest you take great care before purchasing a plasma cutter. The AWD has recently issued a industry safety warning regarding this.
TECARC plasma cutters like all our machines have always complied with current standards.

 

Up to 47mm cutting These robust plasma cutters are the ideal machine for cutting all metals for fabrication & maintenance. Both models give a fast clean cut on virtually all metals. We fit Trafimet cutting torches which perform superbly & have no expensive consumable parts keeping your consumable costs very low. This combined with the high electrical efficiency ensures your overall running costs are kept to an absolute minimum.

These machines are generator friendly.

Built to comply with BS EN 60974-1, CE marked, RoHS compliant and WEEE registered so you can be sure of the safety & quality.

 

We guarantee to fully support these models with spares & service for a minimum of 10 years.

The best back up in the industry!

Standard functions & features

  • Pilot arc to give the best starting & assist with cutting on painted metals or mesh or rusty materials.
  • Infinitely variable output current from 20-70 Amps or 20-120 Amps for the 126i.
  • High duty cycle to cope with heavy cutting applications.
  • Digital meter displays exact cutting power.
  • High efficiency so uses less electric than many other machines.
  • Fail safe low pressure switch to shut machine down if air supply drops too low.
  • Easy to operate with a no fuss approach to the controls so you can simply plug in and cut.
  • Fitted with Trafimet torches which use very common low cost torch consumables (very economical to run).
  • These models are fitted with an air regulator with built in filter and water trap and an accurate pressure gauge
  • Plasma 126i has Trafimet central connector for easy torch removal & high safety.
  • Plasma 76i has Trafimet torch fitted internally for high safety.
Technical Spec Plasma 76i Plasma 126i
Mains input voltage 400V 3 phase 400V 3 phase
Input fuse 16A 20/32A
Generator minimum size 10KVA 15KVA
Output current 20-70A 20-120A
Duty cycle 70A @ 40% 120A @ 60%
Size approx 580Lx360Hx230W 610Lx450Hx330W
Weight approx 19Kg 32Kg
Cutting torch Trafimet CB70 6m Trafimet A141 6m
Max severance cut 25mm 47mm
Max recom cut (M. steel) 19mm 35mm
Max recom cut (stainless/ali) 14mm 27mm
Voltage
400 volt
Welding Range (amps)
Voltage Steps
Duty Cycle
76i 70amps @ 40% 126i 120amps @ 60%
Wire Range
Fuse Rating
76i 16 AMP 126i 20/32AMP
Weight Approx. Kg
76i 17KG 126i 32KG
Voltage
400 volt
Welding Range (amps)
Voltage Steps
Duty Cycle
76i 70amps @ 40% 126i 120amps @ 60%
Wire Range
Fuse Rating
76i 16 AMP 126i 20/32AMP
Weight Approx. Kg
76i 17KG 126i 32KG

 

Related Content

TIG 186i - DC TIG WELDING INVERTERS

TIG 186i - DC TIG WELDING INVERTERS

/welding-products-leicester/tig-welding-supplies-leicester/machines/tig-186i-dc-tig-welding-inverter-leicester/

TIG 186i Dual - DC TIG WELDING INVERTERS

TIG 186i Dual - DC TIG WELDING INVERTERS

/welding-products-leicester/tig-welding-supplies-leicester/machines/tig-186i-dual-dc-tig-welding-inverter-leicester/

TIG 256i DC TIG WELDING INVERTER

TIG 256i DC TIG WELDING INVERTER

/welding-products-leicester/tig-welding-supplies-leicester/machines/tig-256i-dc-tig-welding-inverter/

TIG 216i AC DC TIG WELDING INVERTERS

TIG 216i AC DC TIG WELDING INVERTERS

/welding-products-leicester/tig-welding-supplies-leicester/machines/ac-dc-216i-tig-welding-inverters-leicester/

TEC ARC AC/DC 276T TIG

TEC ARC AC/DC 276T TIG

/welding-products-leicester/tig-welding-supplies-leicester/machines/tec-arc-acdc-276t-tig/

OXFORD TIGMAKER DC TIG/MMA range

/welding-products-leicester/tig-welding-supplies-leicester/machines/oxford-tigmaker-dc-tigmma-range/

OXFORD TIGMAKER AC-DC TIG/MMA RANGE

/welding-products-leicester/tig-welding-supplies-leicester/machines/oxford-tigmaker-ac-dc-tigmma-range/